web analytics

Braindump2go Free Microsoft Dumps Questions Collection

Latest Real Exam Questions and Answers to help you pass Microsoft and other Hot exam 100%!

Official 2014 Latest Microsoft 70-412 Exam Dump Free Download(91-100)!

QUESTION 91
Your network contains an Active Directory domain named contoso.com. The domain contains two Active Directory sites named Site1 and Site2. You need to configure the replication between the sites to occur by using change notification. Which attribute should you modify?
 clip_image001[90]
Answer:
 clip_image001[92]

QUESTION 92
Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
 clip_image002[22]
DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which tool should you use?

A.    Dnslint
B.    A DNS Manager
C.    Active Directory Users and Computers
D.    Dnscmd
Answer: A
Explanation:
Note: If you see question about AD Replication, First preference is AD sites and services, then
Repadmin and then DNSLINT.

QUESTION 93
Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. The domain contains four servers. The servers are configured as shown in the following table.
 clip_image001[94]
You need to update the schema to support a domain controller that will run Windows Server 2012 R2. On which server should you run adprep.exe?

A.    Server1
B.    DC3
C.    DC2
D.    DC1

Answer: B
Explanation:
C. DC3 is the only server that could be assumed to be 64bit
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx#BKMK_WS2012
 clip_image001[96]
QUESTION 94
Your network contains an Active Directory domain named contoso.com. The domain contains domain controllers that run either Windows Server 2003, Windows Server 2008 R2, or Windows Server 2012 R2. You plan to implement a new Active Directory forest. The new forest will be used for testing and will be isolated from the production network. In the test network, you deploy a server named Server1 that runs Windows Server 2012 R2. You need to configure Server1 as a new domain controller in a new forest named contoso.test. The solution must meet the following.
 clip_image002[24]
 clip_image002[26]
Select two options below.

A.    There is no need to set the Forest Functional Level.
B.    Set Forest Functional Level to Windows 2003.
C.    Set Forest Functional Level to Windows 2008
D.    Set Forest Functional Level to Windows 2008 R2.
E.    Set Forest Functional Level to Windows 2012.
F.    There is no need to set the Domain Functional Level.
G.    Set Domain Functional Level to Windows 2003.
H.    Set Domain Functional Level to Windows 2008
I.    Set Domain Functional Level to Windows 2008 R2.
J.    Set Domain Functional Level to Windows 2012.

Answer: BG
Explanation:
When you deploy AD DS, set the domain and forest functional levels to the highest value that your environment can support. This way, you can use as many AD DS features as possible. For example, if you are sure that you will never add domain controllers that run Windows Server 2003 to the domain or forest, select the Windows Server 2008 functional level during the deployment process. However, if you might retain or add domain controllers that run Windows Server 2003, select the Windows Server 2003 functional level. When you deploy a new forest, you are prompted to set the forest functional level and then set the domain functional level. You cannot set the domain functional level to a value that is lower than the forest functional level. Reference: Understanding Active Directory Domain Services (AD DS) Functional Levels
REWORDED
Very smartly reworded that you need to configure server 1 as new DC in a new forest named contoso.test and "also do name resolution". In the answer you will have to select Windows 2003 as domain and forest functional level and you should also check "Domain name system(DNS) server….
This is not in any dumps
* When you deploy AD DS, set the domain and forest functional levels to the highest value that your environment can support. This way, you can use as many AD DS features as possible. For example, if you are sure that you will never add domain controllers that run Windows Server 2003 to the domain or forest, select the Windows Server 2008 functional level during the deployment process. However, if you might retain or add domain controllers that run Windows Server 2003, select the Windows Server 2003 functional level. When you deploy a new forest, you are prompted to set the forest functional level and then set the domain functional level. You cannot set the domain functional level to a value that is lower than the forest functional level.
http://technet.microsoft.com/en-us/library/understanding-active-directory- functionallevels(v=ws.10).aspx

QUESTION 95
Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012 R2. You have a Password Settings object (PSOs) named PSO1. You need to view the settings of PSO1. Which tool should you use?

A.    Get-ADDomainControllerPasswordReplicationPolicy
B.    Get-ADDefaultDomainPasswordPolicy
C.    Server Manager
D.    Get-ADFineGrainedPasswordPolicy

Answer: D
Explanation:
A. Gets the members of the allowed list or denied list of a read-only domain controller’s password replication policy
B. Gets the default password policy for an Active Directory domain.
C. PSO’s managed from AD AC or Powershell Only
D. Gets one or more Active Directory fine grained password policies.
http://technet.microsoft.com/en-us/library/ee617207.aspx
http://technet.microsoft.com/en-us/library/ee617244.aspx
http://technet.microsoft.com/en-us/library/ee617231.aspx

QUESTION 96
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed. You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2. To which group on Server2 should you add Tech1? To answer, select the appropriate group in the answer area.
 clip_image001[98]
Answer:
 clip_image001[100]
Explanation:
http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29012
 clip_image002[28]
Both WinRMRemoteWMIUsers_ and Remote Management Users have the exact same description. As such, I tested connecting with server manager remotely with a non-administrative account. I tried before adding to either group and got this error:
 clip_image001[102]
I then added to Remote Management Users and got this error:
 clip_image001[104]
Note that this is due to access to the event log only.
Next I removed from Remote Management Users and added to WinRMRemoteWMIUsers_ and got this error:
 clip_image001[106]
The error is exactly the same and the explanation is due to event log. In summary, Either one of these answers is correct, however since the document explicitly says use the "WinRMRemoteWMIUsers_" group, then that’s what we got to do.

QUESTION 97
You have a server named Server2 that runs Windows Server 2012 R2. You have storage provisioned on Server2 as shown in the exhibit. (Click the Exhibit button.) You need to configure the storage so that it appears in Windows Explorer as a drive letter on Server1. Which three actions should you perform in sequence? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
 clip_image002[30]
Answer:
 clip_image002[32]
QUESTION 98
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 Both servers have the IP Address Management (IPAM) Server feature installed. You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2. To which group on Server2 should you add Tech1.

A.    IPAM MSM Administrators
B.    IPAM Administrators
C.    winRMRemoteWMIUsers_
D.    Remote Management Users

Answer: C
Explanation:
A. IPAM MSM Administrators can’t access remotely
B. IPAM Administrators can’t access remotely
C. If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be a member of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of the appropriate IPAM security group (or local Administrators group).
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384295(v=vs.85).aspx http://www.microsoft.com/en-us/download/details.aspx?id=29012

QUESTION 99
Your network contains two Active Directory forests named contoso.com and adatum.com. Both forests contain multiple domains. All domain controllers run Windows Server 2012 R2. Contoso.com has a one-way forest trust to adatum.com. A domain named paris.eu.contoso.com hosts several legacy applications that use NTLM authentication. Users in a domain named london.europe.adatum.com report that it takes a long time to be authenticated when they attempt to access the legacy applications hosted in paris.eu.contoso.com. You need to reduce how long it takes for the london.europe.adatum.com users to be authenticated in paris.eu.contoso.com. What should you do?

A.    Create a shortcut trust.
B.    Create an external trust between the forest root domains.
C.    Disable SID filtering on the existing trust.
D.    Create an external trust.

Answer: A
Explanation:
A. Shortcut trusts are one-way or two-way, transitive trusts that can be used when administrators need to optimize the authentication process. Authentication requests must first travel a trust path between domain trees, and in a complex forest this can take time, which can be reduced with shortcut trusts.
B. Use external trusts to provide access to resources located on a Windows NT 4.0 domain or a domain located in a separate forest that is not joined by a forest trust.
C. Filters users or SIDs from one domain
D. Use external trusts to provide access to resources located on a Windows NT 4.0 domain or a domain located in a separate forest that is not joined by a forest trust
http://technet.microsoft.com/en-us/library/cc737939(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc775736(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc772633(v=ws.10).aspx
 clip_image001[108]
QUESTION 100
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. You are creating a central access rule named TestFinance that will be used to audit members of the Authenticated Users group for access failure to shared folders in the finance department. You need to ensure that access requests are unaffected when the rule is published.
What should you do?

A.    Add a User condition to the current permissions entry for the Authenticated Users principal.
B.    Set the Permissions to Use the following permissions as proposed permissions.
C.    Add a Resource condition to the current permissions entry for the Authenticated Users principal.
D.    Set the Permissions to Use following permissions as current permissions.

Answer: B
Explanation:
http://technet.microsoft.com/en-us/library/jj134043.aspx

clip_image001[110]
Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-411 Dump: http://www.braindump2go.com/70-412.html

, , , ,

Comments are currently closed.