web analytics

Braindump2go Free Microsoft Dumps Questions Collection

Latest Real Exam Questions and Answers to help you pass Microsoft and other Hot exam 100%!

[March-2022]Real Exam Questions-Braindump2go NS0-184 Exam VCE and PDF NS0-184 65Q Download[Q20-Q45]

March/2022 Latest Braindump2go NS0-184 Exam Dumps with PDF and VCE Free Updated Today! Following are some new NS0-184 Real Exam Questions!

Question: 20
A customer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)

A. A SnapMirror license is required on both the source cluster and the destination cluster.
B. A SnapMirror Synchronous license is required on both the source and destination clusters.
C. A SnapMirror license is not required on both the source cluster and the destination cluster.
D. A SnapMirror Synchronous license is required on the source cluster.

Answer: B, C

Question: 21
Click the Exhibit button.
  
Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port
e0M in ONTAP?

A. 4
B. 3
C. 2
D. 1

Answer: A
Reference:https://documents.uow.edu.au/~blane/netapp/ontap/sysadmin/accessing/concept/c_oc_accs_acces s-methods-e0m.html

Question: 22
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24×16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?

A. 20
B. 18
C. 17
D. 19

Answer: A
Reference:http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr- 970%2Fstorage aggregate create.html

Question: 23
Your customer is migrating data from a legacy FAS8020 system that runs ONTAP 9.5 software to a new AFF A250 MetroCluster over IP configuration.
In this scenario, which two methods would be supported to migrate the data? (Choose two.)

A. Perform a controller swap from the FAS8020 to the AFF A250s.
B. Create a 4-node cluster on one side and use the vol move command to migrate the data.
C. Use a host-based copy migration method.
D. Configure a SnapMirror copy between the FAS8020 and the AFF A250 systems.

Answer: A, D

Question: 24
You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?

A. a0a
B. e0e
C. e0e-100 D. a0a-100

Answer: B
Reference:https://wikileaks.org/ciav7p1/cms/files/NetApp%20Build%20Document1.docx

Question: 25
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)

A. port sets
B. switch zoning
C. reporting nodes

D. failover groups

Answer: A, D

Question: 26
You are deploying a new AFF All SAN Array A250 into a customer’s existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration? (Choose two.)

A. Brocade SAN Health
B. Cisco Data Center Network Manager (DCNM)
C. Active IQ
D. Active IQ Config Advisor

Answer: B, C
Reference:https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700- series-multilayer-directors/cisco-ucs-mds.html https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-x-series- modular-system/flex-pod-datacenter-ucs-intersight.html

Question: 27
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)

A. storage VM
B. node
C. cluster
D. switch

Answer: A, C
Reference:https://docs.netapp.com/us-en/ontap-whatsnew/pdfs/fullsite- sidebar/TR_4894 NetApp_ONTAP_9_9_1_Feature_Overview.pdf

Question: 28
Click the Exhibit button.
  
  
You are installing a new AFF All SAN Array A700 HA pair.
Referring to the exhibit, which IP address would have been used to join node 02 to the cluster during setup?

A. 192.168.0.112 B. 169.254.212.198 C. 169.254.145.151 D. 192.168.0.101

Answer: A

Question: 29
Which two switch operating system are supported on ONTAP cluster switches? (Choose two.)

A. Brocade FOS
B. Cisco NX-OS
C. Cisco IOS
D. Broadcom EFOS

Answer: B, D
Reference:https://docs.netapp.com/us-en/ontap-systems-switches/pdfs/fullsite- sidebar/AFF_and_FAS_Switch_Documentation.pdf

Question: 30
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)

A. Add the new nodes to the existing cluster and switches.
B. Create a new 2-node switched cluster that uses the CN1610 cluster switches.
C. Create a new 2-node switchless cluster.
D. Migrate the existing cluster to new switches and add the new nodes.

Answer: B, D
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardwar e_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_cannot_perform_takeover

Question: 31
Click the Exhibit button.
  
You are attempting to add a new ONTAP 9.7 node to your ONTAP 9.8 NetApp cluster. After attempting to add the node, it fails as shown in the exhibit.
What are two nondisruptive ways to add the new node to your ONTAP cluster? (Choose two.)

A. Revert the cluster from ONTAP 9.8 to ONTAP 9.7.
B. Re-initialize all the nodes in the ONTAP cluster with ONTAP 9.7.
C. Upgrade the new node from ONTAP 9.7 to ONTAP 9.8.
D. Add the node using the -allow-mixed-version- parameter.

Answer: C, D
Reference:https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Upgrade_ONTAP.pdf

Question: 32
Click the Exhibit button.

You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping- cluster node1 command and received the output as shown in the exhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose two.)

A. 2 paths up, 0 paths down (TCP check)
B. 2 paths up, 0 paths down (UDP check)
C. larger than PMTU communication succeeds on 4 path(s)
D. basic connectivity succeeds on 4 path(s)

Answer: A, D

Question: 33
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

A. Add the shelf to the existing stack.
B. Create a new stack on the HA pair to add the shelf.
C. Connect the shelf to an HA pair with NSE drives.
D. License NSE and add the shelf to this HA pair as a new stack.

Answer: A

Question: 34
You want to add an AFF A400 HA pair to an existing cluster. In this scenario, which LIF type is required?

A. cluster-mgmt
B. intercluster
C. data
D. node-mgmt

Answer: B
Reference:https://docs.netapp.com/us-en/ontap-metrocluster/pdfs/sidebar/Add_a_new_controller_module_to_each_cluster.pdf

Question: 35
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

A. Load the Storage RCF.
B. Cable the AFF A250 nodes to the next free ports on the switch.
C. Cable the AFF A250 nodes to the breakout ports on the switch.
D. Load the Cluster-HA-Breakout RCF.

Answer: C, D

Question: 36
You are preparing for the installation of a new ONTAP 9.8 cluster and need to get the preinstallation information from the customer.
In this scenario, which NetApp tool would you use to create a configuration spreadsheet template for the deployment?

A. Interoperability Matrix Tool
B. ConfigBuilder
C. Active IQ Config Advisor
D. Active IQ Unified Manager

Answer: A
Reference:https://docs.netapp.com/us-en/ontap-select/pdfs/fullsite- sidebar/ONTAP_Select_documentation.pdf

Question: 37
You have added two new AFF A250 nodes to an existing 4-node cluster with NetApp CN1610 cluster network switches. Although the nodes can join the cluster, the storage failover show command output shows that the NVRAM log is not synchronized, and it cannot reach the partner over an HA interconnect.
In this scenario, which two statements are true? (Choose two.)

A. The AFF A250 requires switches with 40GbE port support.
B. The AFF A250 uses different ports for the cluster and the HA interconnect.
C. The AFF A250 requires switches with 25GbE port support.
D. The AFF A250 uses the same port for the cluster and the HA interconnect.

Answer: B, C

Question: 38
A customer is creating a new SVM to host iSCSI LUNs for a Hyper-V cluster. You need to successfully map the new LUNs and make them visible to the Hyper-V cluster.
In this scenario, which host information is required to accomplish this task?

A. IQNs
B. WWNNs
C. WWPNs
D. host names

Answer: D
Reference:https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-storage?view=sc-vmm- 2019

Question: 39
You want to enable secure communication with the SP or BMC through CA-signed certificates. Which two certificate types must be installed in this scenario? (Choose two.)

A. cluster certificate
B. server certificate
C. root CA certificate
D. ONTAP certificate

Answer: B, C
Reference: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_c onfigure_communication_between_ONTAP_and_Service_Processor_(SP)_or_BMC_with_Certificate_ Authority_(CA)_signed_certificates

Question: 40
Click the Exhibit button.

What are two functions of the four Ethernet switches in the supported configuration that is shown in the exhibit? (Choose two.)

A. to provide a direct connection for the SnapMirror Synchronous (SM-S)
B. to install cross-site cluster management switches
C. to provide connectivity for NVRAM over iWARP
D. to enable SyncMirror replication

Answer: A, C

Question: 41
A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host’s OS version running Windows 2016.
In this scenario, which NetApp tool would verify supportability?

A. ONTAP System Manager
B. Active IQ Unified Manager
C. Active IQ OneCollect
D. Interoperability Matrix Tool

Answer: A
Reference:https://docs.netapp.com/us-en/ontap-systems/pdfs/sidebar/AFF_A700_and_FAS9000_Install_and_Setup.pdf

Question: 42
You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?

A. Install the license file.
B. Install the CSHM configuration file.
C. Install the reference configuration file.
D. Reboot the controllers.

Answer: C
Reference:https://github.com/NetAppDocs/ontap-systems-switches/blob/main/switch-bes- 53248/migrate_to_2n_switched_overview.adoc

Question: 43
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither “un-failing” nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)

A. Ask the customer to open a technical case with NetApp Support.
B. Ask the customer for a drive with the same capacity and replace it.
C. Run Active IQ Config Advisor to collect all the logs on the system.
D. Power off the system until the drive has been replaced.

Answer: B, C
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1- prepare-for-installation

Question: 44
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
B. The LIFs must use the default intercluster service policy.
C. The LIFs must be in dedicated broadcast domains an IPspaces.
D. At least one LIF per node is required on each cluster.

Answer: B, C

Question: 45
You installed two separate clusters in an isolated data center without outbound network access. The customer wants to troubleshoot issues locally and also create custom Excel reports for capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

A. Active IQ Digital Advisor
B. Active IQ Unified Manager
C. Cloud Insights
D. ONTAP System Manager

Answer: B

Reference: https://www.netapp.com/media/17229-tr4015.pdf


Resources From:

1.2022 Latest Braindump2go NS0-184 Exam Dumps (PDF & VCE) Free Share:
https://www.braindump2go.com/ns0-184.html

2.2022 Latest Braindump2go NS0-184 PDF and NS0-184 VCE Dumps Free Share:
https://drive.google.com/drive/folders/1cUOI9-G65EqsQ90nPN1kVxrBkjDJZ4k4?usp=sharing

3.2021 Free Braindump2go NS0-184 Exam Questions Download:
https://www.braindump2go.com/free-online-pdf/NS0-184-PDF-Dumps(1-20).pdf
https://www.braindump2go.com/free-online-pdf/NS0-184-VCE-Dumps(21-41).pdf

Free Resources from Braindump2go,We Devoted to Helping You 100% Pass All Exams!

, , , , , ,

Comments are currently closed.